AC Annual Maintenance
Yearly maintenance includes:
22 point inspection
1. Blower Motor – measure amperage and voltage for proper operation
2. Thermostat – test for proper operation, calibrate and level
3. Clean existing air filter (as needed)
4. Bearing – inspect for wear and lubricate
5. Inspect indoor coil
6. In place Evaporator Coil cleaner sprayed at air handler that is safe to leave on and will combat organic growth
7. Condensate Drain – Vacuum, flush, treat with anti-algae, drain solvent (if necessary)
8. Inspect Condenser Coil
9. Refrigerant – monitor operating pressures
10. Safety Devices – inspect for proper operation
11. Electrical Disconnect Box – inspect for proper rating and safe installation
12. Electrical Wiring – inspect and tighten connections
13. Test/inspect contactors for burned, pitted contacts
14. Inspection of electrical components, condition, amp draw, structrue durability, weather proof, etc
15. Inspect electrical for exposed wiring
16. Inspect and test capacitors
17. Inspect fan blade
18. Clean condenser coil and remove debris
19. Inspect service valves for proper operation
20.Measure Supply/Return temperature differential
All the following has been done to each system!
Yearly maintenance includes:
22 point inspection
1. Blower Motor – measure amperage and voltage for proper operation
2. Thermostat – test for proper operation, calibrate and level
3. Clean existing air filter (as needed)
4. Bearing – inspect for wear and lubricate
5. Inspect indoor coil
6. In place Evaporator Coil cleaner sprayed at air handler that is safe to leave on and will combat organic growth
7. Condensate Drain – Vacuum, flush, treat with anti-algae, drain solvent (if necessary)
8. Inspect Condenser Coil
9. Refrigerant – monitor operating pressures
10. Safety Devices – inspect for proper operation
11. Electrical Disconnect Box – inspect for proper rating and safe installation
12. Electrical Wiring – inspect and tighten connections
13. Test/inspect contactors for burned, pitted contacts
14. Inspection of electrical components, condition, amp draw, structrue durability, weather proof, etc
15. Inspect electrical for exposed wiring
16. Inspect and test capacitors
17. Inspect fan blade
18. Clean condenser coil and remove debris
19. Inspect service valves for proper operation
20.Measure Supply/Return temperature differential
All the following has been done to each system!
Yearly maintenance includes:
22 point inspection
1. Blower Motor – measure amperage and voltage for proper operation
2. Thermostat – test for proper operation, calibrate and level
3. Clean existing air filter (as needed)
4. Bearing – inspect for wear and lubricate
5. Inspect indoor coil
6. In place Evaporator Coil cleaner sprayed at air handler that is safe to leave on and will combat organic growth
7. Condensate Drain – Vacuum, flush, treat with anti-algae, drain solvent (if necessary)
8. Inspect Condenser Coil
9. Refrigerant – monitor operating pressures
10. Safety Devices – inspect for proper operation
11. Electrical Disconnect Box – inspect for proper rating and safe installation
12. Electrical Wiring – inspect and tighten connections
13. Test/inspect contactors for burned, pitted contacts
14. Inspection of electrical components, condition, amp draw, structrue durability, weather proof, etc
15. Inspect electrical for exposed wiring
16. Inspect and test capacitors
17. Inspect fan blade
18. Clean condenser coil and remove debris
19. Inspect service valves for proper operation
20.Measure Supply/Return temperature differential
All the following has been done to each system!